Vi stoler på, at du har modtaget den gængse advarsel fra den lokale
systemadministrator. Det drejer sig normalt om følgende tre ting:
#1) Respekter andres privatliv.
#2) Tænk før du taster.
#3) Med stor magt følger stort ansvar.
root's password:
Usage: lspci []
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[]:]]:][][.[]] Show only devices in selected slots
-d []:[] Show only devices with specified ID's
Other options:
-i Use specified ID database instead of /usr/share/pci.ids.gz
-p Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A Use the specified PCI access method (see `-A help' for a list)
-O = Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H Use direct hardware access ( = 1 or 2)
-F Read PCI configuration dump from a given file
ah@linux-a6x5:~>
#13: Driverne her til ATI/AMD i guiden (for det vel dem jeg skal prøve) kan ikke hentes
Model: ATI RS880M [Mobility Radeon HD 4225/4250]
Der er vist to punkter i guiden du overser:
1) Der er ingen grund til at installere de proprietære grafikdrivere, medmindre man har problemer med de frie drivere der er installeret som standard
2) Det fremgår af guiden at de proprietære AMD/ATI-drivere kun understøtter HD5000 og højere - du har efter alt at dømme et ældre grafikkort (HD 4225/4250) som ikke længere er understøttet af AMD/ATI's Linux-driver. Så du har ikke andre muligheder end at holde dig til de frie drivere. Som også gerne skulle fungere rimeligt udmærket.
Jeg var ikke på tråden fra starten. Og havde kun skimmet den igennem.
Men ved nærmere eftersyn er der både tale om noget HD 4225/4250 og HD 6400/7400 i dit hwinfo-output. Mon ikke du har en af de "smarte" computere med to forskellige grafikkort (et kraftigt, og et mere strømbesparende)? Spørgsmålet er så hvilket af dem der bliver brugt. Men sikkert det "gamle".
Helt generelt, hvis man oplever problemer med grafiske artefakter o.l., så prøv at slå (nogle) skrivebordseffekter fra. Hvis man er lidt opmærksom på hvad der sker, kan man normalt rimeligt nemt regne ud, hvilke(n) effekt(er) der fremprovokerer grafikdriver-problemerne - er det ved minimering af vinduer, lukning af vinduer, maksimering eller flytning af vinduer osv. at artefakterne opstår, så kan man rimeligt nemt regne ud hvilke effekter der vil være hovedmistænkte.
Man kan midlertidigt suspendere skrivebordseffekter med Alt+Shift+F12
Man kan konfigurere hvilke skrivebordseffekter man vil have aktive i KDE systemsettings/systemindstillinger -> Skrivebordets opførsel -> Skrivebordseffekter
Man kan deaktivere skrivebordseffekter fuldstændigt i KDE systemsettings/systemindstillinger -> Skærm -> Compositor -> Fjern hak ved "Enable compositor on startup".
... Stort set uanset hvilket grafikkort og hvilken grafikdriver man bruger, kan man regne at en eller flere skrivebordseffekter (eller evt. andre animationer) vil give problemer af den ene eller anden art pga. buggy grafikdrivere. Så det handler bare om at identificere de effekter som er uhensigtsmæssige med ens hardware+drivere og slå dem fra. Sådan synes jeg det har været siden 2007-8 stykker da Compiz kom frem - og siden er KWin-effekter, Unity og Gnomeshell jo så kommet til. Så kombinationsmulighederne er tæt på uendelige.
Kommentarer18
Du skulle kunne se det i
Ellers indtast dmesg i terminalen, som almindelig bruger.
Ellers indtast sudo lspci -v i terminalen. Der skulle du også kunne se det. :)
Måske jeg ikke kan se
ah@linux-a6x5:~> sudo lspci -v i
Vi stoler på, at du har modtaget den gængse advarsel fra den lokale
systemadministrator. Det drejer sig normalt om følgende tre ting:
#1) Respekter andres privatliv.
#2) Tænk før du taster.
#3) Med stor magt følger stort ansvar.
root's password:
Usage: lspci []
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS
Selection of devices:
-s [[[[]:]]:][][.[]] Show only devices in selected slots
-d []:[] Show only devices with specified ID's
Other options:
-i Use specified ID database instead of /usr/share/pci.ids.gz
-p Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A Use the specified PCI access method (see `-A help' for a list)
-O = Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H Use direct hardware access ( = 1 or 2)
-F Read PCI configuration dump from a given file
ah@linux-a6x5:~>
Du skal ikke skrive i
sudo lspci -v
Hvorfor bruger du ikke bare Yast?
dobbeltpost
fandt lige selv ud af der
linux-a6x5:/home/ah # lspci -v
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge
Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Flags: bus master, 66MHz, medium devsel, latency 0
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [9c] HyperTransport: #1a
Capabilities: [f8] HyperTransport: #1c
00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0400000-f05fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1235
Kernel modules: shpchp
00:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0300000-f03fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport
Kernel modules: shpchp
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f0200000-f02fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport
Kernel modules: shpchp
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f0100000-f01fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1234
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [110] Virtual Channel
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
I/O ports at 5038 [size=8]
I/O ports at 504c [size=4]
I/O ports at 5030 [size=8]
I/O ports at 5048 [size=4]
I/O ports at 5010 [size=16]
Memory at f060a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] SATA HBA v1.0
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at f0609000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at f0608000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at f0607000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at f0606000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
Subsystem: Hewlett-Packard Company Device 366b
Flags: 66MHz, medium devsel
Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at f0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f0f00000-f10fffff
Prefetchable memory behind bridge: f1100000-f12fffff
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at f0605000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at f0604000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
Flags: fast devsel
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
Flags: fast devsel
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 4000 [size=256]
Memory at f0500000 (32-bit, non-prefetchable) [size=64K]
Memory at f0400000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: radeon
Kernel modules: radeon
01:05.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series]
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f0510000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: radeon
Kernel modules: radeon
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, fast devsel, latency 0, IRQ 30
I/O ports at 2000 [size=256]
Memory at f0004000 (64-bit, prefetchable) [size=4K]
Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 145c
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-12-ff-ff-4f-ac-81
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f0100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-00-00-01-00-4c-e0-00
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
linux-a6x5:/home/ah #
kan du se grafikkortet ?
02:00.0 VGA compatible
!!! Unknown header type 7f
Kernel driver in use: radeon
Kernel modules: radeon
Er der 2 kort i
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 366b
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 4000 [size=256]
Memory at f0500000 (32-bit, non-prefetchable) [size=64K]
Memory at f0400000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: radeon
Kernel modules: radeon
http://www.notebookcheck.net/
mon ikke det er dette også
Tak for jeres hjælp
Jeg tror ikke der er 2
Det jeg fandt var i YaST i hardwareinfo og der kan jeg ikke se 2 kort
Og det ser da ud til at være det samme, vi fandt fra terminalen
Glad for at have fundet ud af det, da den blinker lidt engang imellem. Og vil derfor gerne se om det kan ændres med nogle drivere
Endnu en gang tak for jeres hjælp
Det var bare fordi jeg ikke
Også der er der 2 kort installeret.
Er der noget forkert i det ?
For eftertiden. Du kan se
# hwinfo --gfxcardDriverne her til ATI/AMD i
http://opensuse-guide.org/3d.php
inux-a6x5:/home/ah # hwinfo --gfxcard
30: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.366]
Unique ID: ul7N.Nz64WwbK9I2
Parent ID: vSkL.nIfBfb8tal5
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Device Name: "ATI iGPU"
Model: "ATI RS880M [Mobility Radeon HD 4225/4250]"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x9712 "RS880M [Mobility Radeon HD 4225/4250]"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x366b
Driver: "radeon"
Driver Modules: "drm"
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
I/O Ports: 0x4000-0x4fff (rw)
Memory Range: 0xf0500000-0xf050ffff (rw,non-prefetchable)
Memory Range: 0xf0400000-0xf04fffff (rw,non-prefetchable)
IRQ: 18 (97428 events)
Module Alias: "pci:v00001002d00009712sv0000103Csd0000366Bbc03sc00i00"
Driver Info #0:
Driver Status: radeon is active
Driver Activation Cmd: "modprobe radeon"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #9 (PCI bridge)
32: PCI 200.0: 0300 VGA compatible controller (VGA)
[Created at pci.366]
Unique ID: B35A.K2tVapCM5X7
Parent ID: 3hqH.vPZVtuD1Sb5
SysFS ID: /devices/pci0000:00/0000:00:03.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: graphics card
Device Name: "ATI Seymour XT"
Model: "Hewlett-Packard Company Radeon HD 6470M"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x6760 "Seymour [Radeon HD 6400M/7400M Series]"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x366b "Radeon HD 6470M"
Revision: 0xff
Driver: "radeon"
Driver Modules: "drm"
Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
Memory Range: 0xf0300000-0xf031ffff (rw,non-prefetchable)
I/O Ports: 0x3000-0x3fff (rw)
Memory Range: 0xf0320000-0xf033ffff (ro,non-prefetchable)
IRQ: 29 (16 events)
Module Alias: "pci:v00001002d00006760sv0000103Csd0000366Bbc03sc00i00"
Driver Info #0:
Driver Status: radeon is active
Driver Activation Cmd: "modprobe radeon"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)
Primary display adapter: #30
linux-a6x5:/home/ah #
Advarsel:http://opensuse-com
http://opensuse-community.org/
Jeg fandt driverne til Amd her, da det link i guiden fører dertil, når man klikker på fejlmeddelelsen.
i guiden
En installation af driverne, gjorde at min pc var umulig at opstarte,
Hver gang kom beskeden om en Plasmafejl.
Det krævede en nyinstallation
Driverne her til
Model: ATI RS880M [Mobility Radeon HD 4225/4250]
Der er vist to punkter i guiden du overser:
1) Der er ingen grund til at installere de proprietære grafikdrivere, medmindre man har problemer med de frie drivere der er installeret som standard
2) Det fremgår af guiden at de proprietære AMD/ATI-drivere kun understøtter HD5000 og højere - du har efter alt at dømme et ældre grafikkort (HD 4225/4250) som ikke længere er understøttet af AMD/ATI's Linux-driver. Så du har ikke andre muligheder end at holde dig til de frie drivere. Som også gerne skulle fungere rimeligt udmærket.
#15
Jeg har skrevet i
Jeg har skrevet i tråden, at jeg har problemer, med blik og grafik
Desuden spørger jeg ( for det er vel dem jeg skal hente ) men fik ikke nogen respons.
Men tak for din forklaring.
Det havde bare været rart, hvis en eller anden havde givet mig den , før det helt galt og jeg stod uden openSUSE -(
Jeg var ikke på tråden fra
Men ved nærmere eftersyn er der både tale om noget HD 4225/4250 og HD 6400/7400 i dit hwinfo-output. Mon ikke du har en af de "smarte" computere med to forskellige grafikkort (et kraftigt, og et mere strømbesparende)? Spørgsmålet er så hvilket af dem der bliver brugt. Men sikkert det "gamle".
Helt generelt, hvis man oplever problemer med grafiske artefakter o.l., så prøv at slå (nogle) skrivebordseffekter fra. Hvis man er lidt opmærksom på hvad der sker, kan man normalt rimeligt nemt regne ud, hvilke(n) effekt(er) der fremprovokerer grafikdriver-problemerne - er det ved minimering af vinduer, lukning af vinduer, maksimering eller flytning af vinduer osv. at artefakterne opstår, så kan man rimeligt nemt regne ud hvilke effekter der vil være hovedmistænkte.
Man kan midlertidigt suspendere skrivebordseffekter med Alt+Shift+F12
Man kan konfigurere hvilke skrivebordseffekter man vil have aktive i KDE systemsettings/systemindstillinger -> Skrivebordets opførsel -> Skrivebordseffekter
Man kan deaktivere skrivebordseffekter fuldstændigt i KDE systemsettings/systemindstillinger -> Skærm -> Compositor -> Fjern hak ved "Enable compositor on startup".
... Stort set uanset hvilket grafikkort og hvilken grafikdriver man bruger, kan man regne at en eller flere skrivebordseffekter (eller evt. andre animationer) vil give problemer af den ene eller anden art pga. buggy grafikdrivere. Så det handler bare om at identificere de effekter som er uhensigtsmæssige med ens hardware+drivere og slå dem fra. Sådan synes jeg det har været siden 2007-8 stykker da Compiz kom frem - og siden er KWin-effekter, Unity og Gnomeshell jo så kommet til. Så kombinationsmulighederne er tæt på uendelige.
#16
Du kunne også prøve om
Du kunne også prøve om du kan udbedre skaden
https://en.opensuse.org/SDB:Configuring_graphics_cards
Hvad er det for en pc du har?